@LexUxDPM wrote:
Every time I copy a component on a mockup and then paste it, it seems to paste two copies instead of just one. If I don't catch this, it really bloats my mockup file size. Has anyone else seen this bug?
Posts: 2
Participants: 2
↧
Bug: Copy - Paste Appears to Paste 2 Copies
↧
Bug: Export All Mockups Works Funky
@LexUxDPM wrote:
Why does Export All Mockups to PNG export every mockup (and all alternate versions) to PNG? This causes a lot of extra work for me to go delete only the actual mockups I wanted in the first place. It used to only export the current selected version for each mockup in the project. Why did this change?
Posts: 2
Participants: 2
↧
↧
[BUG] Pasting color picker color values
@russ wrote:
In the past I was able to copy an object's background color, then paste that color into the background color picker input of another object in order to duplicate the color between objects. Now when I paste (Ctrl+V) the color value, the color is automatically being changed to black -- the pasted value is ignored.
**Note: This only occurs when pasting the color name along with the hex value. Pasting the hex value works correctly.
Also found this, but not shown in the example: Using Ctrl+V pastes the entire value. Right-clicking and selecting paste only copies part of the value. In this case "red4 (cc0000)" was pasted as "red4 (cc"
I tested this in 3.4.2 as well as the .310 pre-release version. Both versions exhibit the same behavior.
Example:
Posts: 2
Participants: 2
↧
Combobox popup when mouse over
@fosi wrote:
Hi is it not possible to let a popup come ip when I "mouse over" over a ComboBox? I need an interactive combobox. The only way I found was with a link to a next mockup with the combobox open. But that means an extra mockup for every state.... a lot!
Thank you very much!
BR
Posts: 2
Participants: 2
↧
Replace button with own design
@fosi wrote:
Hi can I anyhow replace the original design of the button with my own without loosing the clicking/interaction option?
The Wireframe Skin is not enough, I need to have an exact copy of our product.Thanks a lot
BR
Posts: 2
Participants: 2
↧
↧
"All pages scroll to bottom"shortcut on Mac
@Jason_Muxlow wrote:
Using Balsamiq 3 on OS X Yosemite, I've noticed repeatedly that hitting a particular shortcut scrolls every page in my current file to the bottom.
This is frustrating when working on a large set of wires as I have to go to every page and scroll them up to the top.
I can't pin down the exact combination, but I'm always fat-fingering it while moving through a document using Control-Page Up / Down (not the sidebar). Command+Page Down, Command+End, something.
I don't see anything in the shortcuts list for this behavior.
Oversight? Easter Egg? Bug?
Can anyone verify the exact command?
Thanks!
Posts: 2
Participants: 2
↧
Is there any plans for supporting emoji?
@Hong_Jinwoo wrote:
Already, there are so many icons in Balsamic. But if we can use emoji, we can express much more UI.
Is there any plans for supporting emoji?
Posts: 2
Participants: 2
↧
How can i make a longer layout?
@shlomianova wrote:
Hello Everyone,
i have very long scrolling on my design and i get to the end of the layout - 4056 height
How can i make a longer layout?
Posts: 2
Participants: 2
↧
How do I get back to old UI? I can't see a d*mn thing on this!
@whathappened wrote:
What is this nonesense with giant panels all over my screen? Sure- I can hide them, but then there is no way to use the application. I have less than one third of my screen real estate usable to edit a mockup now! Do I really need to go to the view menu and hide and unhide the left and right side panels (Navigator and Inspector) every 30 seconds?
Someone should have used a wireframing application to try this out before releasing it...
Posts: 2
Participants: 2
↧
↧
Bad request mybalsamiq.com
@bwalker wrote:
This is probably on the lower priority list, but most sites I visit don't require the www prefix. It throws me a bit when I get a Bad Request when I try to go to mybalsamiq.com.
When I add the www.mybalsamiq.com, everything works ok.
Thanks.
Posts: 2
Participants: 2
↧
RTL UI Controls support (Hebrew \ Arabic)
@yonih wrote:
Great product i will recommend my company to buy a license but i have a problem.
can you add RTL UI button on the properties that will reverse the direction of the control when selected?
The control should be on the right side of the text, scrollbars on the left side of textarea,combobox selection on the left everything is just reversed![:slight_smile:]( ":slight_smile:")
for example the radio button,checkbox,combobox and so on ?
Posts: 1
Participants: 1
↧
Fearture request - Duplicate official version as new mockup
@Chris_Gatland wrote:
It's great that we can duplicate an alternative version as a new mockup. It's also great that we can duplicate an entire mockup (including all alternatives).
BUT, why can't we duplicate just the official version as a new mockup (ie without also bringing all the alternatives with it?)
Every time I need to do this, I have to delete all the unwanted alternatives manually, one at a time. Either that or I have to create a new blank mockup, and then copy/paste all the content from the parent mockup that I need.
Posts: 2
Participants: 2
↧
Remembering current mockup after stopping walkthrough
@jlilley wrote:
Greetings, I've been using mybalsamiq for some months and we now have a project of about 80 mockups. When doing a wlakthrough, one of my biggest annoyances is that the walkthrough doesn't stop on the current mockup, it goes back to where it started. This makes it much harder to pinpoint and fix an issue because I have to try to find the mockup by name that I was just looking at. Not a problem with small projects, but with larger ones it is hard.
Posts: 4
Participants: 2
↧
↧
Arrow buggy when using handles
@liamjohnston wrote:
See gif:
Moving the whole arrow works fine, but dragging any of the handles results in it totally spazzing out.
Existing arrows look fine until i try to edit them again.
It wouldn't be a big deal if i could just create a new arrow, but the NEW arrows do it too!
It doesn't happen in a fresh new mockups project, so something in my projects seems to upset the arrows at some point.
Very frustrating.
Posts: 4
Participants: 2
↧
Symbols not appearing in task bar
@pottmi wrote:
When I select the Symbols button the available graphic images disappear. The other buttons display graphics (All, Assets, Big, Button, ...).
Attached is the image of what I see.
Posts: 2
Participants: 2
↧
JSON export in myBalsamic
@srosentr wrote:
Hi guys.
When will JSON export be available for myBalsamiq? We really like this option and got exited when seeing it in the desktop edition. However we would really prefer to use the web version
thanks
Posts: 2
Participants: 2
↧
Icon links broken in PDF export
@bookgrrl wrote:
I put icons (MS Word and Adobe Acrobat) in one mockup. Then I added links to the icons, so that users who click on the icons are taken to another mock-up. Then I exported the project to PDF.
The icon links work in Full Screen Presentation mode, but not in the PDF Export.
Posts: 2
Participants: 2
↧
↧
Bug: Renaming Mockup deletes existing name
@Ryan wrote:
When renaming a mockup and adding text as a prefix, the remaining text is not preserved.
Posts: 1
Participants: 1
↧
Missing Mockups in the list (text or thumbnails)
@SCAI wrote:
Hi,
I'm using Blasmiq Mockups 3.4.4 on Windows. My PC has 16 GB RAM and I would like to merge two project files with together more than 100 mockups. The problem is that when I reach 98 mockups, than the new one will not be shown in the mockup list (text and thumbnail list the same). When I try to import them a secend time a message comes up that tells me that the current mockup already exists. Now I can skip the mockup or replace it. If I replace the mockup, it will appear in the mockup list. But now another mockup that was listed before is missing. The number of mockups seams to be limited to 98 mockups.
Is there any way to solve this?
Thanks a lot for help.
Regards Georg
Posts: 2
Participants: 2
↧
Unable to Rename a mockup
@jgg wrote:
When I try to rename a mockup, it seems to have no effect. Is there a workaround?
Posts: 4
Participants: 2
↧